Quote: Sounds like you may need to add initial timing and limit the extent of the full advance.
. I'd set the initial (vac gauge method) then weld (no JB ) the slots for 35 total (w vac adv disconnected) then ch the springs staying just under the pinging point @ WOT then plugging in the vac adv (if used) & adj for just under the pinging point at part throttle
live every 24 hour block of time like it's your last day on earth
. I'd set the initial (vac gauge method) then weld (no JB 
) the slots for 35 total (w vac adv disconnected) then ch the springs staying just under the pinging point @ WOT then plugging in the vac adv (if used) & adj for just under the pinging point at part throttle 
