wiper motor / linkage issue

Print Thread

Re: wiper motor / linkage issue [Re: TonyS451] #438979 08/15/09 11:55 PM 08/15/09 11:55 PM
Joined: Aug 2003 Posts: 1,145 ontario calif N ns1aar super stock
ns1aar super stock N Joined: Aug 2003 Posts: 1,145 ontario calif	Quote: Hey guys - I had Jules restore a 3 speed wiper motor from my 72 Challenger. Got it back and looks great, but the linkage does not line up with the stud on back of the motor. The motor was in the trunk of the car when I got it, so I can't confirm how it was connected before. The part # on the motor is 3431624 and the part number on the arm that slips over the stud is 3431635. The motor is in park position and the arm is about an inch too far forward to slip over the stud in back of the motor. An ideas for me? Thanks The wiper motor is the correct part number but the crank is for a b-body.You'll need part number 3431518.Just guessing since it was in the trunk check the part numbers on the rest of the wiper linkage you may have b- body stuff there also.I might have the correct linkage if you don't NS1AAR

Hop To