Tap size????? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Tap size?????

Print Thread

Re: Tap size????? [Re: 70dusterjohn] #435012 08/11/09 06:42 PM 08/11/09 06:42 PM
Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere S S/ST 3040 master
S/ST 3040 master S Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere	8-32(.164") amd 10-32(.190") are machine thread screws.

Entire Thread
Subject	Posted By	Posted
Tap size?????	70dusterjohn	08/11/09 10:39 PM
Re: Tap size?????	S/ST 3040	08/11/09 10:42 PM
Re: Tap size?????	codfish	08/11/09 10:43 PM
Re: Tap size?????	scratchnfotraction	08/11/09 10:43 PM
Re: Tap size?????	BILLYJAY	08/11/09 10:48 PM
Re: Tap size?????	justinp61	08/11/09 11:00 PM
Re: Tap size?????	70dusterjohn	08/11/09 11:28 PM
Re: Tap size?????	70dusterjohn	08/11/09 11:34 PM
Re: Tap size?????	BILLYJAY	08/12/09 12:19 AM
Re: Tap size?????	440Jim	08/12/09 12:39 AM
Re: Tap size?????	70dusterjohn	08/12/09 02:04 AM
Re: Tap size?????	Ari440	08/12/09 02:08 AM
Re: Tap size?????	70dusterjohn	08/12/09 02:14 AM
Re: Tap size?????	Dodgem	08/12/09 02:39 AM
Re: Tap size?????	Cab_Burge	08/12/09 03:43 AM
Re: Tap size?????	62SAVOY	08/12/09 05:15 AM
Re: Tap size?????	Hot 340	08/12/09 12:26 AM
Re: Tap size?????	440Jim	08/12/09 02:22 PM
Re: Tap size?????	70dusterjohn	08/12/09 02:50 PM
Re: Tap size?????	polyspheric	08/13/09 11:52 AM
Re: Tap size?????	moparx	08/12/09 12:34 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1