.060 rings .040 pistons File to fit - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer .060 rings .040 pistons File to fit

Print Thread

.060 rings .040 pistons File to fit #426050 08/02/09 08:31 AM 08/02/09 08:31 AM
Joined: Dec 2003 Posts: 974 Q qkRick OP super stock
qkRick OP super stock Q Joined: Dec 2003 Posts: 974	Here's an unusual question from an admitted novice. I have a set of .040 over KB pistons and a new set of KB 4000BM8.060 rings for a .060 over bore. Old school engine builder friend of mine says rings can be filed to fit and will work fine. Any input appreciated. Thanks MoParts

Entire Thread
Subject	Posted By	Posted
.060 rings .040 pistons File to fit	qkRick	08/02/09 12:31 PM
Re: .060 rings .040 pistons File to fit	RapidRobert	08/02/09 12:37 PM
Re: .060 rings .040 pistons File to fit	MoparforLife	08/02/09 12:46 PM
Re: .060 rings .040 pistons File to fit	qkRick	08/02/09 01:01 PM
Re: .060 rings .040 pistons File to fit	slantzilla	08/03/09 02:20 AM
Re: .060 rings .040 pistons File to fit	dOc …	08/03/09 02:39 AM
Re: .060 rings .040 pistons File to fit	superbeedave	08/03/09 02:44 AM
Re: .060 rings .040 pistons File to fit	DaytonaTurbo	08/03/09 02:48 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1