Intake manifold porting. - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Intake manifold porting.

Print Thread

Re: Intake manifold porting. [Re: moparmat] #377893 07/21/09 10:42 PM 07/21/09 10:42 PM
Joined: Aug 2005 Posts: 1,074 Wichita Kansas CH3NO2 super stock
CH3NO2 super stock Joined: Aug 2005 Posts: 1,074 Wichita Kansas	You will need some heads that flow in the 350cfm and up range. Thats like building a 408 small block with 273 heads..sorry Engine by DeTar http://www.kansasbadman.com

Entire Thread
Subject	Posted By	Posted
Intake manifold porting.	moparmat	07/17/09 05:57 AM
Re: Intake manifold porting.	sixpackgut	07/17/09 05:59 AM
Re: Intake manifold porting.	moparmat	07/17/09 06:08 AM
Re: Intake manifold porting.	sixpackgut	07/17/09 06:16 AM
Re: Intake manifold porting.	Bob_Coomer	07/17/09 06:28 AM
Re: Intake manifold porting.	Darryls-Demon	07/18/09 01:35 AM
Re: Intake manifold porting.	MoparforLife	07/18/09 02:11 AM
Re: Intake manifold porting.	sixpackgut	07/18/09 02:16 AM
Re: Intake manifold porting.	MoparforLife	07/18/09 02:26 AM
Re: Intake manifold porting.	sixpackgut	07/18/09 02:41 AM
Re: Intake manifold porting.	MoparforLife	07/18/09 03:00 AM
Re: Intake manifold porting.	BSB67	07/17/09 12:21 PM
Re: Intake manifold porting.	RemCharger	07/17/09 05:11 PM
Re: Intake manifold porting.	moparmat	07/17/09 08:03 PM
Re: Intake manifold porting.	451Mopar	07/18/09 09:41 AM
Re: Intake manifold porting.	moparmat	07/22/09 02:04 AM
Re: Intake manifold porting.	CH3NO2	07/22/09 02:42 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1