Need some advice on motor build

Print Thread

Re: Need some advice on motor build [Re: n_bogie1984] #370236 07/09/09 06:59 PM 07/09/09 06:59 PM
Joined: Jan 2003 Posts: 5,486 SoCal Brian Hafliger master
Brian Hafliger master Joined: Jan 2003 Posts: 5,486 SoCal	Quote: well lets see 13 to 1 comp pistons that stick .100 out of top of block. running .040 piston to head clearance. harland sharp 1.6 rockers, mp .590 cam 2 in upright headers http://www.youtube.com/watch?v=BBvqzklNMiI I would say you are around the 525HP mark give or take 25HP. So a true 750HP would be quite a jump!! I would go Victor heads all the way if it were mine.... Brian Hafliger

Entire Thread
Subject	Posted By	Posted
Need some advice on motor build	n_bogie1984	07/08/09 11:42 PM
Re: Need some advice on motor build	fourgearsavoy	07/08/09 11:58 PM
Re: Need some advice on motor build	n_bogie1984	07/09/09 12:03 AM
Re: Need some advice on motor build	CompWedgeEngines	07/09/09 12:14 AM
Re: Need some advice on motor build	n_bogie1984	07/09/09 01:22 AM
Re: Need some advice on motor build	64Post	07/09/09 01:53 AM
Re: Need some advice on motor build	n_bogie1984	07/09/09 10:56 AM
Re: Need some advice on motor build	jim sciortino	07/09/09 12:45 PM
Re: Need some advice on motor build	Diablo	07/09/09 08:55 PM
Re: Need some advice on motor build	Quicktree	07/09/09 09:20 PM
Post deleted by Defbob	Anonymous	07/09/09 09:30 PM
Re: Need some advice on motor build	n_bogie1984	07/09/09 10:36 PM
Re: Need some advice on motor build	Quicktree	07/09/09 10:51 PM
Re: Need some advice on motor build	Brian Hafliger	07/09/09 10:59 PM
Re: Need some advice on motor build	bcrproducts	07/09/09 11:58 PM
Re: Need some advice on motor build	Brian Hafliger	07/09/09 02:25 AM
Re: Need some advice on motor build	Anonymous	07/09/09 04:11 AM

Hop To