Quote:
OK--here's the scoop with my "cheapo" voltometer---with sender disconnected, moving the arm from up to down get about 14-55ohms. With blue wire connected and battery ground on sending unit gage goes form empty to 1/2 full with float travel from up to down. I get about the same results with the other sending unit in both cases. Whaddya think?
According to my FSM, you should have 9.6 ohms plus or minis 1 ohm at full stop. At empty you should have about 73 ohms plus or minis 17 ohms.
Maybe you can bend the stops to get the right readings?
If you can't get those readings the manuel says to replace the sending unit. You sure you have the right sending unit?
Last edited by Challenger 1; 06/24/09 06:51 PM.
