Can someone recommend a head gasket. I blew mine.

Print Thread

Re: Can someone recommend a head gasket. I blew mine. [Re: fig426] #329233 05/26/09 04:29 PM 05/26/09 04:29 PM
Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere S S/ST 3040 master
S/ST 3040 master S Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere	Quote: The number on the gasket itself is 8553PT with a R12 under it. 8553PT is the standard Fel-Pro head gasket, which works fine with iron head/iron block combinations. 1008 is designed for aluminum heads and more expensive. No gasket will seal if either the the block or heads are not machined flat. Studs will help. BTW, 8553_________12.14 cc volume-.054" thick 1008_________8.77 cc volume-.039" thick

Entire Thread
Subject	Posted By	Posted
Can someone recommend a head gasket. I blew mine.	fig426	05/26/09 07:03 PM
Re: Can someone recommend a head gasket. I blew mine.	dusturbd340W5	05/26/09 07:07 PM
Re: Can someone recommend a head gasket. I blew mine.	sixpackgut	05/26/09 07:18 PM
Re: Can someone recommend a head gasket. I blew mine.	fig426	05/26/09 07:50 PM
Re: Can someone recommend a head gasket. I blew mine.	S/ST 3040	05/26/09 08:29 PM
Re: Can someone recommend a head gasket. I blew mine.	emarine01	05/26/09 08:40 PM
Re: Can someone recommend a head gasket. I blew mine.	fig426	05/26/09 09:19 PM
Re: Can someone recommend a head gasket. I blew mine.	RBDuster	05/26/09 10:21 PM
Re: Can someone recommend a head gasket. I blew mine.	clyde	05/27/09 03:44 AM
Re: Can someone recommend a head gasket. I blew mine.	qwkmopardan	05/27/09 06:10 AM
Re: Can someone recommend a head gasket. I blew mine.	S/ST 3040	05/27/09 11:32 AM
Re: Can someone recommend a head gasket. I blew mine.	HMcCandless_Jr	05/27/09 11:49 AM
Re: Can someone recommend a head gasket. I blew mine.	qwkmopardan	05/27/09 04:21 PM
Re: Can someone recommend a head gasket. I blew mine.	dusturbd340W5	05/27/09 04:27 PM
Re: Can someone recommend a head gasket. I blew mine.	sshemi	05/27/09 04:42 PM

Hop To