Originally Posted by GomangoCuda
Originally Posted by cdwmotorsports
Originally Posted by moparx

if you don't want to cut the wheel opening, spacing the forward spring hanger back a little also works. there are usually enough threads on the pressed in studs to go 3/8".
beer



MoparX what do you mean by cut the wheel opening?

He was talking about trimming the front of the wheel opening of the quarter panel and outer wheel house to give additional clearance for taller tires. If you only need a little more room then you can space the spring hanger rearward like said by several people above. If you need more than that then sawzall and/or hammer are your only option.


Thanks, It was a slant 6 car it has no value im not opposed to most mods

eBay-cdwmotorsports