that block has been out for a few years now, it will take 4.10 over bore, it was designed to fill the need for 6.1 blocks, but uses 5.7 open deck pattern , uses 5.7 Head gaskets, makes a great 392(4.00X3.90)ci engine , I finished one up in September with AFR heads made about 700hp on 93,
Deck height is 6.1(9.239) and not 5.7s (9.252).....and before you start your crap HotrodDouche , BOTH 5.7s blue print deck height is 9.252.....and YES I've built 5.7 eagles with 04/06 and 08 rotating assemblies. the Eagle blocks are closer to blueprint height of 9.252 , while a lot of the early 03-05 blocks are closer to 9.258, I've had to cut a few 03's down as much as ..010 .

Photo is an 04 rotating assembly in an 09 eagle block.