There is also adjustment slots between the hinge and the door along with the hinge to body slots. I've done this a number of times and its like there is TOO much adjustment every time I have done it. if you are shimming the hinge away from the body, the door should be pulled out on its slots. If you are shimming between the door and the hinge, that should be done by pulling up on the hinge slots in the body.

And, you can't just loosen one hinge as the other will prevent enough movement. Open the door, and slightly loosen all hinge bolts at the body. Support the door a little higher than you want, and tighten the bolts. You may end up moving the latch plate at the body, which can be another soup sandwich.

If you do end up moving the latch plate, remember this, this latch should often be moved exact opposite of what you think! (if the door latches too far out, move the latch OUT.) good luck.