Originally Posted by modelmakerinc
everything is buttoned up below and behind the camshaft, the front of the engine and accessories are next, a bit of wiring and some gauges, complete the brake system then its run in and play.

there is only .100 distance from the valve cover to the brake booster for those curious. hope to never remove the valve cover:) 1984 D250 booster and master, had to shorten the push-rod by 5/16" and ream the master cyls bolt holes out to 3/8"

had the same valve covers/Power booster issue.. wound up grinding the fins off the covers adjacent to the booster

'01 P1500, Blown/Inj BAE,/Veney ,Bruno/CS2,Dana 60
'01 Dodge 3500 S Cummins Auto, Fresh air kit, 4" Exhaust,
'05 Dodge Magnum R/T - Too Much to list
'60 Willys CJ5
'01 International LPX - Project,DT466, Allison
'64 Plymouth Valiant, Inj 528 Hemi, 2spd