Something to consider about the tall 2.06" pistons is these will have inherently more stability than a much shorter C.H. piston which could maybe offset some of the side load issues being discussed. IE. It should take longer to become a skirt/ring wear issue if at all. J.Rob

2009 PHR\EMC Competitor
2010 PHR\EMC Competitor
2011 PHR\EMC Competitor
2012 PHR\EMC Competitor
2013 PHR\EMC Competitor
2014 HotRod/EMC Competitor
2015 HotRod/EMC NoShow
2016 HotRod/EMC 3rd place SPEC Bigblock
2018 HotRod/EMC 7th place G3