hey guys I got a question for you if you could help me out real quick.

I have a 904 and I have no idea what temp it runs at, however the trans tunnel sure does get hot when I'm driving it everyday with no carpet. I'm running a b&m supercooler I think it's called and that's it. I want to add a gauge to it but I don't really want to spend any/ or a lot of $$$$. I was wondering where should I be getting the temp reading from and if I could use a regular oil temp gauge, or a water temp. gauge to read the temperature. Why and why not. I've never even seen a tranny temp gauge so you'll really help a lot.

I was also thinking of putting a little low profile computer fan on the back side of the tranny cooler to pull some air through it too. I was thinking about wiring it in series with the radiator fan to avoid a bunch of extra wires and stuff.

Let me know what you guys think. Thanks a lot. I'll go with whatever you guys say.

-matt