I have some Lucas 20w50 break in oil on the shelf.
Will be warm outside when fired up.
Making an order for bunch of stuff so adding oil is no problem.
Not looking to save a dollar and spends thousands.
Don't have the Cam Card handy but my old brain says it is.
Cam is new but older Engle( said they used Crane blanks back then)
Think it is 240-252@50 .560-570 lift Solid Flat Tappet
(KV2-KV3?) tight lash ground on 110
Comp Cams Solid lifters have been on.the shelf 25 plus years, I know some say New ones could be soft.
Comp-Cams 1.5 roller rockers