I currently have a set of Comp EDM lifters and was wanting to confirm that I could use them for push rod oiling. I would like to use a ball on ball push rod and cup adjusters to help a little with kick out on my Crane Gold rocker arms. The Cranes to oil properly force quite a bit of distance between the rocker and pushrod. On my current engine I lose over .030 of lift due to the pushrod kicking out at a full lift.
What are the other options to gain pushrod oiling?
'75 Plymouth Duster Phase I 451 906/590/2-660 10.75/126 Phase II 451 Stage VI/590/1050 9.82/135 Phase III 383 906/Victor-Pump gas 11.30/119
"For by grace you have been saved through faith. And this is not your own doing; it is the gift of God,"
|