Well I have a stainless gas tank (Spectra) that I want to add a small sump onto, for the fuel pickup.
I need to buy some stainless sheet to make a little box to weld onto a corner of the tank.
As far as welding stainless, do I need to worry about matching the alloy, because I don't know
what alloy the tank is. I also want to weld in two stainless outlet bungs.
I won't be doing any welding BTW, I will need to find a guy.
Right now I'm just worried about alloy compatibility. I also have a Spectra tank that is said to be stainless (nice tank). I got a comp engineering (which isn't stainless) sump and my friend welded it on 3 years ago and it's been great so far. Not saying it's right or wrong. I did use a 3 stage etching/coating/sealer on the inside though.
'68 Coronet 500 w/ Indy EZ-1 headed 446, 727 trans, 9" rear
First day at the track with SUV street tires and no traction: 1.688 60', 7.24 @ 101.79 in the 1/8 mile
Great customer service from: DominicThumper Carbs, B3 racing engines, Porter Racing Engines, A-1 torque converter's, Quick Performance, Racer Brown Cams, R&R Performance, Manton pushrods
| 
