Acceptable Gear Pattern? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Acceptable Gear Pattern?

Print Thread

Acceptable Gear Pattern? #3027284 03/25/22 06:02 AM 03/25/22 06:02 AM
Joined: Mar 2022 Posts: 7 Auburn, PA T Tim B OP member
Tim B OP member T Joined: Mar 2022 Posts: 7 Auburn, PA	Hi All, I was wondering if someone could take a look at this ring and pinion pattern and let me know what you think? I have patters for both .030 pinion shim and .025 pinion shim. Both backlash was set to .006 to .010. Thanks in advance! Tim

Entire Thread
Subject	Posted By	Posted
Acceptable Gear Pattern?	Tim B	03/25/22 10:02 AM
Re: Acceptable Gear Pattern?	GTX5877	03/25/22 02:23 PM
Re: Acceptable Gear Pattern?	Tim B	03/26/22 10:20 PM
Re: Acceptable Gear Pattern?	1969ronnie	03/27/22 12:24 AM
Re: Acceptable Gear Pattern?	fourgearsavoy	03/27/22 07:59 PM
Re: Acceptable Gear Pattern?	Tim B	03/29/22 11:58 PM
Re: Acceptable Gear Pattern?	fourgearsavoy	03/30/22 01:45 AM
Re: Acceptable Gear Pattern?	Tim B	03/30/22 03:29 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1