So I layed these two side by side because a picture says 1000 words. While I had them out I did a quick gage of the L W and radius of each at the port opening so I could calculate the cross-section. This is a 460 Predator beside a 440-1 Indy cnc'd by Modern. At the opening the MW has a larger area! 3.36" versus 3.16" Obviously it doesn't tell the whole story.  Look at the different routes the air takes, much straighter shot to the valve for the Predators. I need some 
'74 Challenger..9.46 @ 145.9 1/4, 6.001 @ 118 1/8 so far. 4023lb !!! # N/A, Marsh performance 655ci, Indy Maxx, T/R, Indy 600-13 X's, Street legal, pump gas, full interior, Cal-Tracs, mufflers, 3:73's and real 10.5 radials.
9.51 @ 142.4 1/4, 6.003 @ 114 1/8 with our old mule KB, 572-13, 580 wedge.
RHD '68 Barracuda Fastback 323ci street/strip. Best ET 13.88 @ 99.03
| 
