replacing floor pan - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer replacing floor pan

Print Thread

replacing floor pan #288569 04/14/09 08:22 PM 04/14/09 08:22 PM
Joined: Jul 2007 Posts: 245 New Hampshire W whitemtnelf OP enthusiast
whitemtnelf OP enthusiast W Joined: Jul 2007 Posts: 245 New Hampshire	Hi folks, I picked up two replacement floor pans from RustRepair.com. They are partial pans. Should I cut most of the floor out and just leave enough of a flange for the weld, or just cut out the bad stuff and lay the pan over it?

Entire Thread
Subject	Posted By	Posted
replacing floor pan	whitemtnelf	04/15/09 12:22 AM
Re: replacing floor pan	rss	04/15/09 01:14 AM
Re: replacing floor pan	whitemtnelf	04/15/09 12:38 PM
Re: replacing floor pan	Darius	04/15/09 02:02 PM
Re: replacing floor pan	whitemtnelf	04/15/09 03:31 PM
Re: replacing floor pan	rss	04/15/09 04:51 PM
Re: replacing floor pan	whitemtnelf	04/15/09 05:34 PM
Re: replacing floor pan	rss	04/15/09 08:40 PM
Re: replacing floor pan	burdar	04/15/09 09:12 PM
Re: replacing floor pan	whitemtnelf	04/16/09 12:31 AM
Re: replacing floor pan	Darius	04/15/09 06:27 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1