Best thing to do is look at other switch. If the 2 red are on the top 2 screws and black on bottom do same to new switch. Black wire will only be hot to bottom of 1 switch the other goes to light. If after installing you can't turn the light on and off with either switch all you have to do is flop the 2 red wires on new switch.
On the original switch the wires are molded into the housing(no screws).. the wife got got me a new switch
and I will try this again... any more help would be great... I dont want to fry this new switch... not at $30
a pop... thanks much
