I watched that before I tried.

If you see in the video, the cable passes through a bracket holding a tube like passage.

This is where my problem lies. To take the slack out, there was a lot, when I pulled back on the cable the entire piece came out of the tube.

The cable will not move through that tube now. So when I put the clip back on, the cable is limited to only taking out any slack left and does not allow the accelerator to fully operate.

I know there is something else wrong, but don't have any idea what it is.

I have an appointment at a garage next friday. I will get him to do it and see if he can tell me what I screwed up on it.