Distributor Curve for Stockish 383

Print Thread

Re: Distributor Curve for Stockish 383 [Re: Mattax] #2721615 12/05/19 10:33 AM 12/05/19 10:33 AM
Joined: Jun 2008 Posts: 3,916 usa L lewtot184 master
lewtot184 master L Joined: Jun 2008 Posts: 3,916 usa	initial timing is going to depend on how many degrees are in the distributor. the cam/advance plate will be stamped with a number to tell how many degrees are in the distributor. then a curve can be planned.

Entire Thread
Subject	Posted By	Posted
Distributor Curve for Stockish 383	markz528	12/04/19 11:18 PM
Re: Distributor Curve for Stockish 383	moparpollack	12/05/19 01:23 AM
Re: Distributor Curve for Stockish 383	markz528	12/05/19 01:42 AM
Re: Distributor Curve for Stockish 383	DrCharles	12/05/19 02:01 AM
Re: Distributor Curve for Stockish 383	Fab64	12/05/19 06:14 AM
Re: Distributor Curve for Stockish 383	Mattax	12/05/19 01:50 PM
Re: Distributor Curve for Stockish 383	lewtot184	12/05/19 02:33 PM
Re: Distributor Curve for Stockish 383	Mattax	12/05/19 02:51 PM
Re: Distributor Curve for Stockish 383	DrCharles	12/05/19 06:02 PM
Re: Distributor Curve for Stockish 383	Y3 70 BEE	12/06/19 09:06 PM
Re: Distributor Curve for Stockish 383	lewtot184	12/06/19 09:48 PM
Re: Distributor Curve for Stockish 383	Y3 70 BEE	12/06/19 11:20 PM
Re: Distributor Curve for Stockish 383	DrCharles	12/06/19 11:40 PM
Re: Distributor Curve for Stockish 383	Y3 70 BEE	12/07/19 12:37 AM
Re: Distributor Curve for Stockish 383	Mattax	12/07/19 01:43 AM
Re: Distributor Curve for Stockish 383	BSB67	12/07/19 02:24 AM
Re: Distributor Curve for Stockish 383	DrCharles	12/07/19 02:29 AM
Re: Distributor Curve for Stockish 383	BSB67	12/07/19 02:37 AM
Re: Distributor Curve for Stockish 383	moparx	12/07/19 05:52 PM
Re: Distributor Curve for Stockish 383	CSK	12/07/19 06:06 PM
Re: Distributor Curve for Stockish 383	DrCharles	12/07/19 07:17 PM
Re: Distributor Curve for Stockish 383	Mattax	12/05/19 02:40 PM
Re: Distributor Curve for Stockish 383	Cab_Burge	12/07/19 10:35 PM
Re: Distributor Curve for Stockish 383	CSK	12/07/19 11:31 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To