6.4 BGE crate motor with a 274 comp cam

Print Thread

Re: 6.4 BGE crate motor with a 274 comp cam [Re: Ray408G3Hemi] #2692667 08/29/19 04:55 PM 08/29/19 04:55 PM
Joined: Aug 2003 Posts: 3,245 Between a rock & a hard place C cudadoug master
cudadoug master C Joined: Aug 2003 Posts: 3,245 Between a rock & a hard place	Originally Posted by Ray408G3Hemi Originally Posted by WO23Coronet A stock 392 cam made 580 hp? Where was it installed? Locked the cam straight up, for the 580 pull, and then back 2 degrees, I've seen him skip a tooth then move the Phaser back and lock it with machine spacer blocks. I read in the post that "Peak Hp with the DragPak was 580". So the stock short block had a DP cam, or it was a stock 392 cam? I didn't think the DP cam would clear without notches in the pistons. Either/or, pretty impressive for mostly stock stuff! Last edited by cudadoug; 08/29/19 04:57 PM.

Entire Thread
Subject	Posted By	Posted
6.4 BGE crate motor with a 274 comp cam	biff426	08/27/19 01:45 PM
Re: 6.4 BGE crate motor with a 274 comp cam	Ray408G3Hemi	08/27/19 04:10 PM
Re: 6.4 BGE crate motor with a 274 comp cam	HotRodDave	08/27/19 06:21 PM
Re: 6.4 BGE crate motor with a 274 comp cam	WO23Coronet	08/28/19 02:09 AM
Re: 6.4 BGE crate motor with a 274 comp cam	biff426	08/28/19 03:27 PM
Re: 6.4 BGE crate motor with a 274 comp cam	03heavy	08/28/19 03:57 PM
Re: 6.4 BGE crate motor with a 274 comp cam	Ray408G3Hemi	08/29/19 01:26 AM
Re: 6.4 BGE crate motor with a 274 comp cam	hudsonhornet7x	08/29/19 02:01 AM
Re: 6.4 BGE crate motor with a 274 comp cam	03heavy	08/29/19 12:50 PM
Re: 6.4 BGE crate motor with a 274 comp cam	HotRodDave	08/29/19 05:49 PM
Re: 6.4 BGE crate motor with a 274 comp cam	cudadoug	08/29/19 08:55 PM
Re: 6.4 BGE crate motor with a 274 comp cam	HotRodDave	08/29/19 09:05 PM
Re: 6.4 BGE crate motor with a 274 comp cam	WO23Coronet	08/31/19 02:59 AM
Re: 6.4 BGE crate motor with a 274 comp cam	HotRodDave	08/31/19 09:00 PM
Re: 6.4 BGE crate motor with a 274 comp cam	Ray408G3Hemi	09/14/19 12:07 PM
Re: 6.4 BGE crate motor with a 274 comp cam	A39Coronet	08/29/19 01:28 AM
Re: 6.4 BGE crate motor with a 274 comp cam	biff426	10/27/19 10:46 PM
Re: 6.4 BGE crate motor with a 274 comp cam	Dart451	10/28/19 11:38 AM
Re: 6.4 BGE crate motor with a 274 comp cam	Ray408G3Hemi	10/30/19 05:50 PM
Re: 6.4 BGE crate motor with a 274 comp cam	Dart451	01/11/20 12:27 AM
Re: 6.4 BGE crate motor with a 274 comp cam	moparmitch	01/20/20 11:45 PM
Re: 6.4 BGE crate motor with a 274 comp cam	biff426	01/21/20 12:27 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To