To machine or not - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer To machine or not

Print Thread

Re: To machine or not [Re: 6PakBee] #2688713 08/17/19 12:10 PM 08/17/19 12:10 PM
Joined: Jun 2004 Posts: 3,319 Chicago Burbs sthemi master
sthemi master Joined: Jun 2004 Posts: 3,319 Chicago Burbs	Agree, I would hone and then see what it looks like. most likely it will run fine... It's not a substitute for re-boring the cylinder oversize and new pistons tho.. Video Little Red Wagon Indy Nats,BurnoutContest

Entire Thread
Subject	Posted By	Posted
To machine or not	Garry Owen	08/12/19 05:30 PM
Re: To machine or not	John_Kunkel	08/12/19 06:44 PM
Re: To machine or not	Jeremiah	08/12/19 07:00 PM
Re: To machine or not	rickseeman	08/12/19 08:11 PM
Re: To machine or not	an8sec70cuda	08/12/19 08:16 PM
Re: To machine or not	Cab_Burge	08/12/19 09:37 PM
Re: To machine or not	Garry Owen	08/12/19 10:31 PM
Re: To machine or not	bobby66	08/12/19 11:23 PM
Re: To machine or not	Garry Owen	08/13/19 03:19 AM
Re: To machine or not	poorboy	08/14/19 01:08 AM
Re: To machine or not	Garry Owen	08/14/19 02:11 AM
Re: To machine or not	Magnum	08/17/19 02:17 AM
Re: To machine or not	6PakBee	08/17/19 02:12 PM
Re: To machine or not	sthemi	08/17/19 04:10 PM
Re: To machine or not	62maxwgn	08/17/19 02:07 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1