How heavy is the driver?
I always want to get the car dead level, or as close to level as possible, regardless corner weighs. 95% street car? With a driver? The first set of numbers doesn't look terrible if the car sat right.
A little bit of extra load on the LF bar and a little bit of pre-load on the RR will add weight to the RR (and the LF) if that's what is needed without making it sit goofy. Coilovers on the rear would make it easier, but preload on the bar is about all you have to work with now.
I wouldn't worry about getting the weight where it should be in a strictly drag situation if it's only going to go to the track occasionally. But if the rear weights are close to equal, it should be fine when you do go.
Thanks for the reply.
Driver = 235 lbs. All weights given were with the driver in the car.
Whether I add weight to the RR with the torsion bars or with the cal-trac bar (pre-load) the ride height is offset.
I will remove some of the weight/load to the RR as you suggested. This will even out the weight in the rear and start to return ride height closer to equal. Seems that I need to find a happy medium and I likely pasted that point with the adjustments made.
