Torgue Convertor for 440 B body????

Print Thread

Torgue Convertor for 440 B body???? #2629744 03/06/19 08:07 PM 03/06/19 08:07 PM
Joined: Feb 2005 Posts: 2,679 owt west Thread Ender1 OP master
Thread Ender1 OP master Joined: Feb 2005 Posts: 2,679 owt west	I have a 1968 B body, with a 440 i just finished. It has a Comp Cams XE275Hl .525 in/ex with 231 and 237* at.050.. About 10.50 compression with decent ported heads, street dominator and holley 750 DP and 3.55 gear. The power band i believe is 2000 to 6500 or so. My question is what is the bare minimum stall needed just to get it to idle in gear decently.

Entire Thread
Subject	Posted By	Posted
Torgue Convertor for 440 B body????	Thread Ender1	03/07/19 12:07 AM
Re: Torgue Convertor for 440 B body????	Cab_Burge	03/07/19 03:33 AM
Re: Torgue Convertor for 440 B body????	John_Kunkel	03/07/19 05:40 PM
Re: Torgue Convertor for 440 B body????	Clanton	03/08/19 04:52 PM
Re: Torgue Convertor for 440 B body????	John_Kunkel	03/08/19 08:28 PM
Re: Torgue Convertor for 440 B body????	BSB67	03/09/19 02:52 AM
Re: Torgue Convertor for 440 B body????	Cab_Burge	03/09/19 05:22 PM
Re: Torgue Convertor for 440 B body????	Morty426	03/10/19 03:50 PM
Re: Torgue Convertor for 440 B body????	BSB67	03/10/19 06:23 PM
Re: Torgue Convertor for 440 B body????	ZIPPY	03/08/19 06:52 PM
Re: Torgue Convertor for 440 B body????	R/T1968R/T	03/09/19 07:30 PM

Hop To