I have an old Direct Connection high volume oil pump kit in my 440. The old o-rings are leaking. Does anyone know the correct dimensions of the o-rings? They are the ones that go between the oil filter adapter and the 1/4" spacer and also between the spacer and the pump body. Just eyeballing, the larger one looks to be approximately 2-5/8" diameter and maybe 3/32" thick. The smaller looks about 3/4" diameter and 3/32" thick. I am not talking about the pump body to block o-ring.
Possible sources?
Measure what you have and look on the McMaster-Carr web site. They should be able to hook you up.
