ROLLER CAM LOW LIFT FLOW HEADS

Print Thread

Re: ROLLER CAM LOW LIFT FLOW HEADS [Re: A/MP] #2590058 12/10/18 09:19 PM 12/10/18 09:19 PM
Joined: Oct 2007 Posts: 4,208 New York polyspheric master
polyspheric master Joined: Oct 2007 Posts: 4,208 New York	One reason why high static CR worked is because with the poor port flow the cylinder was never full at high RPM. Delayed intake valve closure as a tuning aid to modify CR is a bad idea. Boffin Emeritus

Entire Thread
Subject	Posted By	Posted
ROLLER CAM LOW LIFT FLOW HEADS	A/MP	12/10/18 04:42 AM
Re: ROLLER CAM LOW LIFT FLOW HEADS	fast68plymouth	12/10/18 05:02 AM
Re: ROLLER CAM LOW LIFT FLOW HEADS	Cab_Burge	12/10/18 08:32 AM
Re: ROLLER CAM LOW LIFT FLOW HEADS	Iowan	12/11/18 03:37 AM
Re: ROLLER CAM LOW LIFT FLOW HEADS	pittsburghracer	12/11/18 03:55 AM
Re: ROLLER CAM LOW LIFT FLOW HEADS	DrCharles	12/11/18 04:37 AM
Re: ROLLER CAM LOW LIFT FLOW HEADS	Cab_Burge	12/11/18 04:57 AM
Re: ROLLER CAM LOW LIFT FLOW HEADS	b1dartsport	12/11/18 04:58 AM
Re: ROLLER CAM LOW LIFT FLOW HEADS	pittsburghracer	12/11/18 05:16 AM
Re: ROLLER CAM LOW LIFT FLOW HEADS	RalleyA12	12/11/18 04:19 AM
Re: ROLLER CAM LOW LIFT FLOW HEADS	Anonymous	12/10/18 04:48 PM
Re: ROLLER CAM LOW LIFT FLOW HEADS	pittsburghracer	12/10/18 05:01 PM
Re: ROLLER CAM LOW LIFT FLOW HEADS	1Fast340	12/10/18 09:30 PM
Re: ROLLER CAM LOW LIFT FLOW HEADS	pittsburghracer	12/10/18 09:45 PM
Re: ROLLER CAM LOW LIFT FLOW HEADS	polyspheric	12/11/18 01:19 AM
Re: ROLLER CAM LOW LIFT FLOW HEADS	DoubleD	12/11/18 04:24 PM
Re: ROLLER CAM LOW LIFT FLOW HEADS	fast68plymouth	12/11/18 05:08 PM

Hop To