I am in the process of upgrading my charging system to support the installation of a FAST EZ-EFI 2.0 system. I purchased an AR Engineering bracket kit to mount a Denso alternator and I am doing the bulkhead connector bypass with an 8 gauge charging wire and 12 gauge fusible link. Yesterday I came across this Denso altenator mounted in a mid-80's Jeep. It has the double V-belt pulley I need and is rated at 75 amps, which sounds about right, but I'm not sure how to wire it. All the info I find on the web refers to Denso alternators with a charging wire and an additional 3 wire plug. Will this alternator work with my charging system and electronic external voltage regulator? And if so, can anyone tell me how to wire it up?