MSD 6AL with MSD 8546 Pro Billet ...what to do with ballast

Print Thread

MSD 6AL with MSD 8546 Pro Billet ...what to do with ballast #2564463 10/15/18 04:18 PM 10/15/18 04:18 PM
Joined: Oct 2008 Posts: 411 Harleysville, PA USA T Tommy D OP mopar
Tommy D OP mopar T Joined: Oct 2008 Posts: 411 Harleysville, PA USA	Help needed. I am running an MSD6AL with a MSD #8546 Pro Billet Distributor. I had some wiring issues with the original harness, and ordered and received a new engine harness from Evans Wiring. I saw the wiring diagram on the MSD site...The question I have is regarding the wires for the ballast resistor. My harness has these wires. The old setup and the diagram do not use the resistor. Do I simply not connect the wires to the ballast resistor? Should I just let them hang? Thank you in advance.

Entire Thread
Subject	Posted By	Posted
MSD 6AL with MSD 8546 Pro Billet ...what to do with ballast	Tommy D	10/15/18 08:18 PM
Re: MSD 6AL with MSD 8546 Pro Billet ...what to do with ballast	therocks	10/15/18 09:03 PM
Re: MSD 6AL with MSD 8546 Pro Billet ...what to do with ballast	Tommy D	10/15/18 09:12 PM
Re: MSD 6AL with MSD 8546 Pro Billet ...what to do with ballast	an8sec70cuda	10/15/18 09:21 PM
Re: MSD 6AL with MSD 8546 Pro Billet ...what to do with ballast	Tommy D	10/15/18 11:47 PM
Re: MSD 6AL with MSD 8546 Pro Billet ...what to do with ballast	Cab_Burge	10/16/18 04:16 AM
Re: MSD 6AL with MSD 8546 Pro Billet ...what to do with ballast	383man	10/16/18 07:05 PM
Re: MSD 6AL with MSD 8546 Pro Billet ...what to do with ballast	Tommy D	10/17/18 01:37 PM

Hop To