A 318 car with a 904 and a 7 1/4 inch axle will need a longer drive shaft than a 727 with a 8 3/4 will shruggy scope
A 727 with a Dana 60 will need a shorter one than with a 8 3/4 also shruggy
My message is one size does not fit properly in all of those cars, dang Ma Mopar anyways grin

Last edited by Cab_Burge; 10/15/18 12:10 PM.
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)