So in that case you just need to add a spacer
or a few washers to get the alt lined up.. very
simple.. you dont even need to spend the big
bucks for a trick pulley
I’m concerned about space if the crank pulley is spaced that far out. Just curious what pulley others are using with this balancer. I’m going with Andyf’s suggestion.
Do you own the crank pulley you show on the
engine now.. is so all you would do is move the
alt out about 3/16".. I build my own pulleys
so it easy for me.. but if you run just the
crank and alt you might be able to cut the
outer pulley off(but maybe not)
