Air pressure in bias ply M/T slicks

Print Thread

Re: Air pressure in bias ply M/T slicks [Re: caper] #2549631 09/13/18 02:55 PM 09/13/18 02:55 PM
Joined: Mar 2005 Posts: 525 Can , Nova Scotia , Cape Breto... C caper OP mopar
caper OP mopar C Joined: Mar 2005 Posts: 525 Can , Nova Scotia , Cape Breto...	I have DA Afco shocks on it on all four corners. When leaving the line, the car lifts a small bit than drops when I lose traction. I am limited with shock travel because of the Alterkation from end. New best 10.18 , 1.40 60 ft 496 Scott Brown built, street driven 3600 lbs,654 hp , 653 ft tq

Entire Thread
Subject	Posted By	Posted
Air pressure in bias ply M/T slicks	caper	09/13/18 06:34 PM
Re: Air pressure in bias ply M/T slicks	CMcAllister	09/13/18 06:45 PM
Re: Air pressure in bias ply M/T slicks	sgcuda	09/13/18 06:58 PM
Re: Air pressure in bias ply M/T slicks	caper	09/13/18 06:55 PM
Re: Air pressure in bias ply M/T slicks	Cab_Burge	09/13/18 07:33 PM
Re: Air pressure in bias ply M/T slicks	sam64	09/13/18 07:46 PM
Re: Air pressure in bias ply M/T slicks	@#$%&*!	09/15/18 03:56 AM
Re: Air pressure in bias ply M/T slicks	madscientist	09/13/18 07:03 PM
Re: Air pressure in bias ply M/T slicks	RustyM	09/13/18 07:15 PM
Re: Air pressure in bias ply M/T slicks	DusterKid	09/13/18 07:30 PM
Re: Air pressure in bias ply M/T slicks	cb1289	09/13/18 07:54 PM
Re: Air pressure in bias ply M/T slicks	caper	09/13/18 09:19 PM
Re: Air pressure in bias ply M/T slicks	MR_P_BODY	09/13/18 09:45 PM
Re: Air pressure in bias ply M/T slicks	dvw	09/13/18 10:12 PM
Re: Air pressure in bias ply M/T slicks	'72CudaRacer	09/14/18 04:22 AM
Re: Air pressure in bias ply M/T slicks	caper	09/14/18 04:39 AM
Re: Air pressure in bias ply M/T slicks	dvw	09/14/18 11:16 AM

Hop To