My 63 Belvedere has stock steering and stock K member. Old pan was Milodon 31010 deep sump. Too low for my street use. Road rash and subsequent hole in the pan. I am careful with it but roads in the midwest are not forgiving.

I desire a minimum 6 QT pan and want to keep depth at or near 5-1/2. I've been all over the web and have talked to Mancini, Van's and Schumacher. Nothing that fits the bill.

I did read that any 62-65 BB B Body oil pan will clear the k-member. Any experience with that out there?

I am also planning to raise front suspension an inch as well but I would like to keep the pan under 6" deep.

Any ideas on who might "reman" something that would work?

Thanks!!