Will be an all out race motor, but on the milder side. 11.5:1, won't be spun past 6500 and will have around a 600 lift solid cam.

Thats just a good street build, id not be afraid of the light scat I beams, they are proven.

Over 7k id use H beams.

I used to use forged cranks and H beams in every build until I realized a simple 500-550 hp stroker is no harder on a cast crank and I beams. 600-650 area all forged.

Id rather use a cast kit and pay for good machine work on the block then use a forged kit on so so block prep.

The only time id use all forged in a 6500 rpm motor is if it had a power adder or T brake.

Your 11.5 comp with al. heads is peanuts. A pump gas build as well.