Thanks for all the replies. I'll use the 750 I have on the Eddy and see how it goes. I ran the engine in with an old TQ intake and NOS TQ carb, but ran a cross the eddy-intake for a song and am going with the "day-2" look with some Micky-T valve covers.

So another question on the intake change out. I ordered an intake gasket kit and got the one with the heat crossover block off built in. My car won't see any cold weather for my type of driving.

Question: on the intake install, do you really need the paper gaskets? On the previous intake install, I used a small amount of good RTV around the ports and just bolted it down. Didn't have any leaks, but only about an hour of run time. Never seen an article covering this topic on the proper install. Wondering what you guys/gals do?