1957 Plynouth Axle Identification - Center Section ID

Print Thread

Re: 1957 Plynouth Axle Identification - Center Section ID [Re: ScottSmith_Harms] #2471748 03/25/18 12:36 PM 03/25/18 12:36 PM
Joined: Mar 2018 Posts: 3 Ohio C CMcKnight member
CMcKnight member C Joined: Mar 2018 Posts: 3 Ohio	What I am trying to do is buy an Auburn limited-slip and a new 3:73 ring and pinion. The Auburn carrier specifies that it is for 1964 and newer. So, I guess what you guys are saying is that I can use this set-up if I shorten my axles by 1/8"?

Entire Thread
Subject	Posted By	Posted
1957 Plynouth Axle Identification - Center Section ID	ScottSmith_Harms	08/01/09 01:04 AM
Re: 1957 Plynouth Axle Identification - Center Section ID	1_WILD_RT	08/01/09 01:56 AM
Re: 1957 Plynouth Axle Identification - Center Section ID	ScottSmith_Harms	08/01/09 02:27 AM
Re: 1957 Plynouth Axle Identification - Center Section ID	9 Sec Phill	08/01/09 03:06 AM
Re: 1957 Plynouth Axle Identification - Center Section ID	440newport	08/01/09 03:48 AM
Re: 1957 Plynouth Axle Identification - Center Section ID	DoctorDiff	08/01/09 04:37 AM
Re: 1957 Plynouth Axle Identification - Center Section ID	ScottSmith_Harms	08/01/09 06:01 AM
Re: 1957 Plynouth Axle Identification - Center Section ID	John_Kunkel	08/01/09 07:27 PM
Re: 1957 Plynouth Axle Identification - Center Section ID	ScottSmith_Harms	08/01/09 08:18 PM
Re: 1957 Plynouth Axle Identification - Center Section ID	John_Kunkel	08/01/09 10:20 PM
Re: 1957 Plynouth Axle Identification - Center Section ID	ScottSmith_Harms	08/01/09 10:29 PM
Re: 1957 Plynouth Axle Identification - Center Section ID	CMcKnight	03/25/18 05:45 AM
Re: 1957 Plynouth Axle Identification - Center Section ID	ScottSmith_Harms	03/25/18 05:52 AM
Re: 1957 Plynouth Axle Identification - Center Section ID	NANKET	03/25/18 07:31 AM
Re: 1957 Plynouth Axle Identification - Center Section ID	zrxkawboy	03/25/18 01:29 PM
Re: 1957 Plynouth Axle Identification - Center Section ID	CMcKnight	03/25/18 04:36 PM
Re: 1957 Plynouth Axle Identification - Center Section ID	NANKET	03/25/18 08:40 PM
Re: 1957 Plynouth Axle Identification - Center Section ID	CMcKnight	03/25/18 09:14 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To