Looking for camshaft suggestions for a 383 496" stroker.
This combination is way different with the short 1.538:1 rod ratio.
This is the flat top, 4cc valve relief, 84 cc head (RPM), so at 0.060" over I am coming up with 11.37:1 compression.
Want to run pump gas, and this is a street car, not a racer so looking at street friendly lobe profiles.

With the lower rod ratio, will it want a cam with the wider LSA?

I am thinking a cam like the Comp XR292R but with 112 LSA and installed around 108 to 110 centerline?

The specs would be something like Advertised 292/297, 0.050" duration, 254/260, 112 LSA, 110 CL

In theory that calculates to 7.82:1 DCR compression and 159 cranking pressure?

Anyone build one of these