Quote:

Quote:

Today I measured the depth of the heart shaped area of the combustion chamber of the head and got .085" on one & .094" on the other



You should measure every chamber. Its unlikely they will all be that close.


I guess I should have clarified 0.85" across on one head (one was .086) and .094 across on the other head. I used feeler guages and a 12" ruler and moved them around to the deepest point. I also want to polish the chambers. Any suggestions on where I can get polishing tips for a dremmel? Or the best way to polish the heads would be great. I just want a nice shiny finish.