I am trying to learn about the 833 4 speed.

Print Thread

Re: I am trying to learn about the 833 4 speed. [Re: sgcuda] #2453218 02/17/18 10:02 PM 02/17/18 10:02 PM
Joined: Oct 2003 Posts: 4,013 South Park, Pa. 68LAR master
68LAR master Joined: Oct 2003 Posts: 4,013 South Park, Pa.	Originally Posted By sgcuda Face plating refers to the engagement type installed onto the gear and has no bearing on the gear strength. This DOES NOT make it a clutchless transmission and YOU WILL destroy the gears if you try it. It is designed to be a very low maintenance setup as opposed to Pro Shifted gears. X2 Also, the difference in strength between the two is about 100ft/#'s and HP. 23 spline is supposed to be good for up to 450 hp/torq. The 18 spline is supposed to be 100 better. 4 speed street legal. Best time 10.99 @ 124 mph on 93 octane pump gas @ 3926# total weight

Entire Thread
Subject	Posted By	Posted
I am trying to learn about the 833 4 speed.	hudsonhornet7x	02/17/18 05:47 PM
Re: I am trying to learn about the 833 4 speed.	ric3xrt	02/17/18 06:20 PM
Re: I am trying to learn about the 833 4 speed.	hudsonhornet7x	02/17/18 06:27 PM
Re: I am trying to learn about the 833 4 speed.	sgcuda	02/17/18 07:22 PM
Re: I am trying to learn about the 833 4 speed.	NANKET	02/17/18 07:53 PM
Re: I am trying to learn about the 833 4 speed.	Cab_Burge	02/17/18 08:42 PM
Re: I am trying to learn about the 833 4 speed.	sgcuda	02/17/18 11:09 PM
Re: I am trying to learn about the 833 4 speed.	68LAR	02/18/18 02:02 AM

Hop To