1965 727 tail shaft housing - '65 ONLY? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 1965 727 tail shaft housing - '65 ONLY?

Print Thread

Re: 1965 727 tail shaft housing - '65 ONLY? [Re: 6bblgt] #2449862 02/10/18 11:46 PM 02/10/18 11:46 PM
Joined: Mar 2006 Posts: 9,825 MI, usa dvw master
dvw master Joined: Mar 2006 Posts: 9,825 MI, usa	I usually upgrade the reaction support (or complete pump) and the input shaft to 67 or newer. This allows current spline converters. If you use 71 and up reaction support and front drum you also get the benefit of the wide bushing drum. Doug

Entire Thread
Subject	Posted By	Posted
1965 727 tail shaft housing - '65 ONLY?	6bblgt	02/09/18 10:17 AM
Re: 1965 727 tail shaft housing - '65 ONLY?	A727Tflite	02/09/18 01:04 PM
Re: 1965 727 tail shaft housing - '65 ONLY?	dvw	02/09/18 05:17 PM
Re: 1965 727 tail shaft housing - '65 ONLY?	Cab_Burge	02/09/18 07:23 PM
Re: 1965 727 tail shaft housing - '65 ONLY?	Morty426	02/09/18 08:43 PM
Re: 1965 727 tail shaft housing - '65 ONLY?	Part_Stalker	02/09/18 11:48 PM
Re: 1965 727 tail shaft housing - '65 ONLY?	64Post	02/10/18 12:46 AM
Re: 1965 727 tail shaft housing - '65 ONLY?	A727Tflite	02/09/18 11:57 PM
Re: 1965 727 tail shaft housing - '65 ONLY?	Part_Stalker	02/10/18 12:05 AM
Re: 1965 727 tail shaft housing - '65 ONLY?	dvw	02/11/18 03:46 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1