Back through the torsion bar crossmember needs to be removed. The 6spd swap is not even close to a bolt-in swap on an ebody...
goodys, you got any pics or advise? Thanks
I don't have many "good" pictures, just some sporadic in-process ones. I kept the torsion bars on my car, so I needed some good structure there. My torsion bar crossmember has the new upper support and what stock crossmember that was left was boxed. I added a new fore/aft frame member as well to help scatter some t-bar load toward the front.
Mine is a T56 Magnum, similar enough to the TR6060 you are probably playing with.