Not trying to hijack this thread but I'm putting a 440 motor together for customer who will install it in a 1972/76 era W200 4x4 that ended up with a rear sump truck or Class a motor home oil pan with the external dipstick tube and dipstick and I don't have any idea what the oil capacity is, can any of you help me on this help
Thanks in advance up
OP, that motor is NOT out of Imperial, it is a truck, motor home or industrial 413 motor thumbs
I'm starting to put one of those motors using block and crankshaft only with the crankshaft offset ground down to 2.200 and increasing the stroke to 3.91 up
It's getting hot tanked and magnafluxed now and if it passes and has no cracks I will have it bored to 4.250 and make a pump gas motor with a set of 440 Source aluminum heads on it for my 1963 Plymouth Fury boogie

Last edited by Cab_Burge; 12/26/17 05:06 AM.
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)