Scratch. Thanks for the reply. I did some googling and confirmed the rotors that fit.
I didn't know the c body was the same width!
Truck isn't lowered. Planning to stay with the stock width.
I may lower it some but I'm not interested in slamming it.
15x10 wheels in the back. Something in the 30/31 inch tall tire that fills the wheel wells
I just got it running and the open 8.25 isn't going to cut it
I don't want c clip axles otherwise I'd go 9.25 and a Dana isn't I the budget
I figured 5x4.5 bolt pattern would open up used wheel choices too.