Need valve lash help with a lunati camshaft

Print Thread

Re: Need valve lash help with a lunati camshaft #240272 03/01/09 08:03 PM 03/01/09 08:03 PM
Joined: Aug 2008 Posts: 189 long island new york K kingdust member
kingdust member K Joined: Aug 2008 Posts: 189 long island new york	0 lash then 1/2 turn. when exh.valve is open, adjust intake(lifter will be on base circle of lobe) when intake goes past full lift and starts to close,adjust the exh( lifter will be on base circle of lobe. good luck. LIFE IS A LESSON,YOU LEARN IT WHEN YOUR THROUGH!

Entire Thread
Subject	Posted By	Posted
Need valve lash help with a lunati camshaft	PlumCrazyCharger	03/01/09 11:22 PM
Re: Need valve lash help with a lunati camshaft	moparlulu	03/01/09 11:28 PM
Re: Need valve lash help with a lunati camshaft	Keith Richards	03/01/09 11:29 PM
Re: Need valve lash help with a lunati camshaft	goldmember	03/01/09 11:31 PM
Re: Need valve lash help with a lunati camshaft	MoparforLife	03/01/09 11:39 PM
Re: Need valve lash help with a lunati camshaft	Pacnorthcuda	03/01/09 11:47 PM
Re: Need valve lash help with a lunati camshaft	Anonymous	03/01/09 11:53 PM
Re: Need valve lash help with a lunati camshaft	kingdust	03/02/09 12:03 AM
Re: Need valve lash help with a lunati camshaft	PlumCrazyCharger	03/02/09 12:46 AM

Hop To