5.7 and the 727 pb - Moparts Forums

Register Log In Moparts Forums Gen III Hemi Tech 5.7 and the 727 pb

Print Thread

Re: 5.7 and the 727 pb [Re: cudadoug] #2399670 11/06/17 10:57 PM 11/06/17 10:57 PM
Joined: Dec 2008 Posts: 1,285 okla. sam64 pro stock
sam64 pro stock Joined: Dec 2008 Posts: 1,285 okla.	some of the first flex plate conversions used a spacer between the block and trans.because the flex plate was flat.

Entire Thread
Subject	Posted By	Posted
5.7 and the 727 pb	csmopar	11/06/17 05:30 PM
Re: 5.7 and the 727 pb	hudsonhornet7x	11/06/17 07:09 PM
Re: 5.7 and the 727 pb	sam64	11/06/17 10:40 PM
Re: 5.7 and the 727 pb	csmopar	11/06/17 10:57 PM
Re: 5.7 and the 727 pb	moparpollack	11/06/17 11:55 PM
Re: 5.7 and the 727 pb	csmopar	11/06/17 10:57 PM
Re: 5.7 and the 727 pb	RTSE4ME	11/07/17 02:01 AM
Re: 5.7 and the 727 pb	savoy64	11/07/17 02:01 AM
Re: 5.7 and the 727 pb	moparmitch	11/07/17 02:20 AM
Re: 5.7 and the 727 pb	cudadoug	11/07/17 02:33 AM
Re: 5.7 and the 727 pb	sam64	11/07/17 02:57 AM
Re: 5.7 and the 727 pb	csmopar	11/07/17 04:24 PM
Re: 5.7 and the 727 pb	savoy64	11/08/17 12:51 AM
Re: 5.7 and the 727 pb	C_B5	11/12/17 05:09 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1