Hello all,
I have my engine running and have even drove the pick up. (WOW) My only two questions are first,where should I set my timing at. I started it and broke the cam in at 10 btc. Engine specs are as follows. Scat balanced rods and crank, KB hyper 10.5:1 pistons J heads 2.02's with gasket match porting and some bowl work 64cc chambers, Block has been decked for a true 10.5. I am running the Lunati 60405 with matching springs,retainers keepers and Harland Sharp rockers.Exhaust is shorty headers out to 2 1/2 exhaust. Have not adjusted rockers or timing yet. Also this is a 89 Dakota that has no room between the water pump and rad. Therefore I have a 69 cast iron pump but it is tough to time the engine because it exits over the timing tab, runs down and under the balancer to the passenger side rad. Full tube headers on the way. Any ideas on the timing or the water pump would be greatly appreciated.
Thanks
Shawn