I have since used the ron francis kit and really liked it a lot, i even called with a couple questions and got good tech support.It seemed to be high quality with good directions.
I also tried EZ wiring in another project and it worked with no problem. i didnt like the way the fuse block mounted. it only had 2 bolts and i couldnt get it to sit flat because it only had 2 legs , i guess you would call them, to sit aginst. also the wire was allready attached to the fuse block so if you didnt need that wire you had to cut it off and wrap the end up , so it wasnt quite as neat. but i didnt have any problems with any of it working and it has 7000 miles on it now.
i have a painless harness i am trying next.