I have Harland Sharp rocker gear. I have been told that anything above 1.50 diameter spring wont work with these rocker arms. Was just curious( if i ever ran a roller wifh this HS setup) if anybody makes roller springs that are 1.50 or smaller OD Just looked through the comp catalog and didnt see anything
Last edited by B3422W5; 10/11/17 04:31 PM.
69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight 418 BPE factory replacement headed stroker, 565 lift solid cam Best so far, low 10.30’s 1/4 1.41 best 60 foot 6.56 at 104.17
|